https://bios-pw.org/
just ignore any popups …
https://ytmp3hub.com/
Checking out options …
https://briarproject.org/ – no images , i think
https://berty.tech/
https://scuttlebutt.nz/ – this ones interesting but convoluted to setup
https://element.io/ – most polished
echo off
cls
:: This batch file will rename the computer using the service tag in BIOS.
:: find out what path the batch file is in
:: set batch_path=%~dp0
:: change drive
:: %batch_path:~0,2%
:: crop the last character and cd into it
:: cd %batch_path:~0,-1%
:: clear screen show bitlocker status
:: cls
:: WMIC computersystem where caption=’current_pc_name’ rename new_pc_name
:: pipe machine service tag to serial.txt so that later we can reverse pipe into the variable that used to name the capture file
wmic bios get serialnumber | find /v “SerialNumber” > %temp%/serial.txt
::pipe in serial
set /p serial=<%temp%\serial.txt
:: trim spaces
set serial_temp=%serial: =%
:: store serial
set serial=%serial_temp%
set current_name=%hostname%
@echo.
@echo *************************************************************************************
@echo — Renaming machine from %computername% to XXXXX%serial% —
@echo *************************************************************************************
wmic computersystem where “name=’%computername%'” call rename name=XXXXX%serial%
echo off
cls
::
:: This needs to run as admin for bitlocker to report status.
::
:: This batch file will create an informative capture of a bitlocker status once complete encryption using cap.exe dos screen capture.
::find out what path the batch file is in
set batch_path=%~dp0
::change drive
%batch_path:~0,2%
::crop the last character and cd into it
cd %batch_path:~0,-1%
::we loop until bitlocker task is 100%
echo Waiting for Bitlocker Encrytion to be 100%
:loop
::repeat until find 100%
timeout 1 > nul
echo .
manage-bde c: -status | find “100%”
if errorlevel 1 goto loop
::bitlocker done
:: clear screen show bitlocker status
cls
manage-bde c: -status
:: display information on build
echo Enginner: %HomePath%
echo Machine name: %ComputerName%
::pipe machine service tag to serial.txt so that later we can reverse pipe into the variable that used to name the capture file
wmic bios get serialnumber | find /v “SerialNumber” > %temp%/serial.txt
::pipe in serial
set /p serial=<%temp%\serial.txt
:: trim spaces
set serial_temp=%serial: =%
:: store serial
set serial=%serial_temp%
::pipe machine asset tag to asset.txt so that later we can reverse pipe into the variable that used to name the capture file
wmic systemenclosure get SMBIOSAssetTag | find /v “SMBIOSAssetTag” > %temp%/asset.txt
::pipe in asset tag
set /p asset=<%temp%\asset.txt
:: trim spaces
set asset_temp=%asset: =%
:: store asset tag
set asset=%asset_temp%
:: display system info
echo Service Tag: %serial% – Asset Tag: – %asset%
echo Users directories present:
dir c:\Users\ /b
echo Capture taken on %date%
:: capture the screen, set to 1080p
cap “Bitlocker – Service Tag %serial% – Machine %ComputerName% – Asset Tag %asset%.jpg” 0 0 1920 1080
:: create an export of all software install, diagnostic
::echo Exporting software list to “Machine %ComputerName% – Service Tag %serial% – Asset Tag %asset%.txt”
::wmic product get name, version, vendor > “Machine %ComputerName% – Service Tag %serial% – Asset Tag %asset%.txt”
@echo off
cls
:: if the batch file is not run as admin, quit
net.exe session 1>NUL 2>NUL || (Echo This script requires admin elevated rights, exiting. & echo. & pause & Exit /b 1)
echo This script will perform the following tasks:
echo.
echo – copy new group policy files to enable bitlocker pin requirement
echo – reload the policy
echo – trigger bitlocker encryption
echo – type in the bitlocker pin 8 digits, you will not see your input, verify pin.
echo – forced reboot in 5 secs (give time for encrytion to
echo – on reboot encryption will enable, login and monitor status by clicking on key is desktray.
echo.
::find out what path the batch file is in
set batch_path=%~dp0
::crop the last character and cd into it
cd %batch_path:~0,-1%
:: change drive
cd %CD%
echo This batch file is being run from %batch_path%
echo.
xcopy GroupPolicy\. c:\windows\system32\GroupPolicy\ /s/e/y
gpupdate /force
::manage-bde -on C: -RecoveryKey D: -RecoveryPassword
manage-bde -protectors -add c: -pw
manage-bde -on -usedspaceonly C:
shutdown /r -t 5
For the macro to work, you will need to add in four extra columns named: DocFolderPath, DocFileName, PdfFolderPath, and PdfFileName. These should be exactly as written here, with no spaces and each word capitalised.
Sub MailMergeToPdfBasic() ‘ Mark the start of the Subroutine (i.e. Macro) and name it “MailMergeToPdf”
‘ Macro created by Imnoss Ltd
‘ Please share freely while retaining attribution
‘ Last Updated 2021-05-03
Dim masterDoc As Document, singleDoc As Document, lastRecordNum As Long ‘ Create variables (“Post-it Notes”) for later use
Set masterDoc = ActiveDocument ‘ Identify the ActiveDocument (foremost doc when Macro run) as “masterDoc”
masterDoc.MailMerge.DataSource.ActiveRecord = wdLastRecord ‘ jump to the last active record (active = ticked in edit recipients)
lastRecordNum = masterDoc.MailMerge.DataSource.ActiveRecord ‘ retrieve the record number of the last active record so we know when to stop
masterDoc.MailMerge.DataSource.ActiveRecord = wdFirstRecord ‘ jump to the first active record (active = ticked in edit recipients)
Do While lastRecordNum > 0 ‘ create a loop, lastRecordNum is used to end the loop by setting to zero (see below)
masterDoc.MailMerge.Destination = wdSendToNewDocument ‘ Identify that we are creating a word docx (and no e.g. an email)
masterDoc.MailMerge.DataSource.FirstRecord = masterDoc.MailMerge.DataSource.ActiveRecord ‘ Limit the selection to just one document by setting the start …
masterDoc.MailMerge.DataSource.LastRecord = masterDoc.MailMerge.DataSource.ActiveRecord ‘ … and end points to the active record
masterDoc.MailMerge.Execute False ‘ run the MailMerge based on the above settings (i.e. for one record)
Set singleDoc = ActiveDocument ‘ Identify the ActiveDocument (foremost doc after running the MailMerge) as “singleDoc”
singleDoc.SaveAs2 _
FileName:=masterDoc.MailMerge.DataSource.DataFields(“DocFolderPath”).Value & Application.PathSeparator & _
masterDoc.MailMerge.DataSource.DataFields(“DocFileName”).Value & “.docx”, _
FileFormat:=wdFormatXMLDocument ‘ Save “singleDoc” as a word docx with the details provided in the DocFolderPath and DocFileName fields in the MailMerge data
singleDoc.ExportAsFixedFormat _
OutputFileName:=masterDoc.MailMerge.DataSource.DataFields(“PdfFolderPath”).Value & Application.PathSeparator & _
masterDoc.MailMerge.DataSource.DataFields(“PdfFileName”).Value & “.pdf”, _
ExportFormat:=wdExportFormatPDF ‘ Export “singleDoc” as a PDF with the details provided in the PdfFolderPath and PdfFileName fields in the MailMerge data
singleDoc.Close False ‘ Close “singleDoc”, the variable “singleDoc” can now be used for the next record when created
If masterDoc.MailMerge.DataSource.ActiveRecord >= lastRecordNum Then ‘ test if we have just created a document for the last record
lastRecordNum = 0 ‘ if so we set lastRecordNum to zero to indicate that the loop should end
Else
masterDoc.MailMerge.DataSource.ActiveRecord = wdNextRecord ‘ otherwise go to the next active record
End If
Loop ‘ loop back to the Do start
End Sub ‘ Mark the end of the Subroutine
Extracting audio from them I found this type of url on footer code
Yet to decipher more…
https://t4.bcbits.com/stream/a1bf3ff8f57f8c6122842fe526ce9aec/mp3-128/1208179075?p=0&ts=1678122596&t=ab79193bfc95614eade484ba948e2d015fc04607&token=1678122596_01143f52c2374c2391457740cc512503723dce54
https://bandcamp.com/stream_redirect?enc=mp3-128&track_id=286068639&ts=1678036257&t=73dbf6a875a58358cb1ecf61ddbca7eaad3b9dc0
converts itself to
https://t4.bcbits.com/stream/896453365a3d7c4268e35e1bd5478bae/mp3-128/286068639?p=0&ts=1678123639&t=9af110e6c96d9cfc115fd92be9e33d0f8e718b64&token=1678123639_6cac1e0e851f3f78bf79b3b0f880fa0542f01bae
net session >nul 2>&1 || exit
This script runs the net session command, which returns an error message if the user is not an administrator. The || operator allows the script to execute the exit command if the previous command returns an error code. The >nul 2>&1 redirects the output of the net session command to null so that it doesn’t display any error messages on the screen.
Get path
set batch_path=%~dp0
cd into it, remove last character
cd %batch_path:~0,-1%
change drive from a batch file that has been elevated
%~d0%